Monark 831 E Troubleshooting Guide

Manual 839 E

- 0 Terminal/PC -1-3 see manual - (0) _1234675Monark 839 E10Connect the terminal via the supplied 0-modem 1. cable (9-pol. D-sub female connector

Monark 839 E 11Analogue controlThe workload of the Ergometer can be controlled by external devices such as an analog ECG device (must b

1Monark 839 E12CalibrationThe 839 E is a mechanically weighted and braked ergometer, making performance validation a simple procedure. Ca

200:00 0.0 kcal ♥ 123 000 rpm 00N 0 watt (exemple) 0= Menu 3= Start1Monark 839 E 13Validation o

Monark 839 E14Check at the bottom of the flywheel that the 1. brake belt is loose, see Fig: Brake belt is loose. If not, move the pendulum to 4

Monark 839 E 15Fig: 0-positionFig: Check loose brake belt. Fig: 2 kp Fig: 4 kpFig: 6 kp Fig: 0 kp

123456Monark 839 E16CalibrationAlthough all Ergometers are calibrated at the factory the user may wish to verify this by performing a mechani

Monark 839 E 17Testing with Ergomedic 839 EThe versatility of the 839 E/939 Medical Ergometer enable it to be utilized in a variety of testin

1Monark 839 E18Subject supervisionThe ergometer performs automated tests virtually by itself, requiring minimal intervention by the operator. This all

Monark 839 E 19Fitness Rating Index - Males Maximum Oxygen Consumption ml/kg/minFitness Rating Index - FemalesMaximum Oxygen Consumption ml/kg/minRati

ImportantRead the manual carefully before using the cycle and save it for future use.

Monark 839 E20Troubleshooting guideSymptom Probable Cause/Corrective ActionLED does not light up. No current in the outlet. Check the fuses. Right tr

Monark 839 E 21Operation interferencesIt is normally considered that about 70 % of all shutdowns on small computers are caused by mains interferences,

Monark 839 E22Where to obtain additional informationThe user may require more information concerning several areas of the ergometer usage. This manual

Monark 839 E 23ReferencesÅstrand I, ”Aerobic work capacity in men and women with special reference to age”, Acta Physiol Scand. 1. 49 (suppl. 169), 19

ServiceService check and maintenanceTo keep your Ergometer in good shape you should make a regular service.Service action:If you wish to disinfect the

BatteriesIf the meter i sbattery-operated, the batteries are in a separate package at delivery. If the storing time has been long the battery power ca

Chain 1/2“ x 1/8“Check the lubrication and tension of the chain in regular intervals. In the middle of its free length the chain should have a

Freewheel sprocketWhen replacing the freewheel sprocket remove frame covers if necessary. Remove the chain according to section ”Chain 1/2” x 1

34363837333210 16 25 264041715 21 20 19 46 23 24 28618 17 27293011 9 5 82 14 311 3 5424 13 12 393522 Monark 839 E28Spare partsPos. Qty. Art. No. Desc

1 2 3 575655514243444145394050 34 35 6037 4 3824 25 26 28 29 30 31 23 47 48 14 21 22 15 19 17 18 16 15 25 32 33 27 7 8 9 53545 12 49 11 46 6 26 13 10

Monark Exercise AB ������������������������������������������������������������� 4Product Information ����������������������������������������������

...

...

KROONS VÄG 1, SE-780 50 VANSBRO, SWEDEN | WWW.MONARKEXERCISE.SE | TEL: +46(0)281 59 49 40 | FAX: +46(0)281 719 81Version 1206Art. No: 7950-234

Monark 839 E4Monark Exercise ABMonark has 100 years’ experience of bicycle production. The Monark tradition has yielded know-how, experience, and a re

1Monark 839 E 5FactsLarge, well-balanced flywheel 20 kg (48 lbs)•Brake power 0-1400W at 200 rpm•Pendulum scale, easy to calibrate•Adjustable saddle

Monark 839 E6Power on crank or flywheelWhen the Ergomedic 839 Medical is adapted to ECG work tests it is set to measure the power on the crank.

1684216842Metro/PulsRPM123Monark 839 E 7Cycle adjustmentsDo not forget to remove the transport protections (the transportation bracket on the w

- 0 Terminal/PC -1-3 see manual - (0) _12 34675Monark 839 E8First check the brake belt tension. If the belt is too tight loosen it a little by

Monark 839 E 9Connection to PCTo connect a PC to the ergometer, use a 0-modem cable (RS232) with a 9-pin D-sub female at each end. If no RS23