Monark LT2 Troubleshooting Guide download pdf (Page 10)

LT2

Sleep mode

Sleep mode is activated after 10 minutes if you don't

press any button or if no rpm is recorded. This is to

save battery power.

All settings are saved, but the personal settings are

erased (to protect your personal privacy).

The meter wakes up when you press any button or

if rpm is recorded. The meter goes directly to 'Quick

start' (see separate section).

Display Description

The meter has the following functions:

Settings for different units of measurement •

It is possible to calibrate the meter to get the •

correct workload

Personal data such as age, max pulse, weight and •

gender can be set

USB port for continuous output of data to an •

external computer

The meter also shows current pulse as percentage •

of max. HR

The workload is rpm independent•

Display

Pedal revolution (RPM) pedal revolutions /

min

HR bpm

TIME min:sec

Workload (WATT alt. kpm/min) Watt

Speed km/h

Distance km

Calories (KCAL) kcal

% Max HR %

Fig: Display (Training)

1) % of max HR

2) Time

3) Kcal (estimated value)

4) Speed km/h

5) Pedal revolutions (rpm)

6) START STOP

7) ENTER

8) (+/-) button

9) Heart rate (HR)

10) Distance (km)

11) Workload (Watt)

12) Program

13) PROGRAM

14) HEART button

Batteries: 4 x 1.5 V, R14

Storing temperature: -10º C - +60º C

Operating temperature: 0º C - +50º C

NOTE! Rechargeable batteries cannot be used!

Workload adjustment

The workload is adjusted by using the control lever (1)

located on the handlebars. From A which is light

workload to F which is heavy workload.

Fine adjustment of the workload is done by the cable

adjuster (2). See Fig: Workload adjustment.

Fig: Workload adjustment

1) Control lever

2) Cable adjuster

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments

Monark LT2 Troubleshooting Guide Page 10

Comments to this Manuals

Related products and manuals for Spin bikes Monark LT2